CGDI K2 Stopped Problem Solution

Everytime turn on CDDI K2 displays (unfortunately, CGDI K2 has stopped), How to solve?

Here is the detail steps:

1. Click on the connected WIFI, check the current IP address and saveit.

2.Long press the connected network, and when the prompt appears, click Modify Network.

3.Click Advanced Options and select Static for IPv4 Proxy.

4.Then enter the first three digits of the IP address recorded in the first step in the IPv4 address column, and enter any number between 150-254 for the fourth digit, but it should not be the same as the IP recorded previously.

5.Then enter 8.8.8.8 in the DNS1 input box and 8.8.4.4 in the DNS2 input box, and finally click Save.

6.Restart the device and verify again whether the problem exists.

Author: admin