This post will guide you how to use CGDI A2 to match a new key for Honda Greiz 2017 anti-theft.
Step 1: Access IMMO Application
Connect CGDI A2 key programmer to the vehicle correctly
Open the CGDI A2 software and navigate to the IMMO application.
Select the correct Honda vehicle model from the menu.
- HONDA-> Model Selection-> CREIZ
Step 2: Configure Key Settings
Choose the key type (e.g., transponder, remote).
Select the OBD pin configuration for your vehicle.
- Select Mechanical Key-> 16 PIN
Step 3: Begin Key Learning
Turn on the ignition using the original key.
Select Key-> Add 1 Key
Follow the on-screen prompts to turn on/off ignition
Step 4: Program the New Key
Insert the new key and turn on the ignition within 20 seconds.
Observe the dashboard indicator light (it will turn off once successful).
Confirm the action in the software when prompted.
Step 5: Finalize the Process
Follow the software instructions to cycle the ignition (ON/OFF).
It will show “key registration completed” when the key is fully programmed.
Note: Ensure all steps are followed precisely for successful programming.
Done!
Honda Greiz 2017 anti-theft key matching with CGDI A2 programmer is successful.
