Continue Reading...
Posted in AT200 BMW

CG BMW AT-200 Update All log

CG BMW AT-200 Update All log Version: [2.0.0] date: 2023-07-20 content: 1. Add a CONNECTAL TC17 engine: PCR2.1, SDI7, DPS6,…

 Continue Reading...
Posted in AT200 BMW CG FC-200 CGDI BMW Test Report

Best Tool to Clone BMW MEVD17.2.5 N13

Which tool is good for BMW MEVD17.2.5 TC1797 N13 ISN clone? Here is the suggestion: CG FC200 ECU Programmer, BMW…

 Continue Reading...
Posted in AT200 BMW CG FC-200

Bosch MG1 MD1 ECU Read and Write by CG FC200/ AT200

Both CG FC200 and AT200 BMW support Bosch MG1 MD1 ECU. FC200 is the update version of AT200. It is dedicated…

 Continue Reading...
Posted in AT200 BMW CG FC-200

Mercedes Continental SIM271DE ECU Clone: BMW AT200 or CG FC200?

Question: Have a Mercedes SIM271 ECU. The engine was water damaged and car cannot start normally. Any idea which ECU…

AT200
 Continue Reading...
Posted in AT200 BMW

How to use AT200 to clone BMW ECU MG1 and MD1?

To clone BMW ECU MG1 and MD1 on bench, BMW AT200 Programmer needs a set of AT-200 adapters. at200 bench…

BMW AT-200
 Continue Reading...
Posted in AT200 BMW

CGDI AT-200 BMW Support List

CGDI AT-200 BMW Support List: [1 Series(F20)] 125i N20B20A 218(BOSCH MEVD17.2.9 TC1797_N20=10) 114i N13B16A 102(BOSCH MEVD17.2.5 TC1797_N13=10) 116i N13B16A 136(BOSCH…

BMW AT-200
 Continue Reading...
Posted in AT200 BMW

BMW AT-200 V1.7.4 Update

BMW AT-200 V1.7.4 Update: 1. Add Polish language 2. Add DQ200 (TC1766/TC1784): Read and write DFLASH, EXT DFLASH, PFLASH (Need…

BMW AT-200 ECU Programmer
 Continue Reading...
Posted in AT200 BMW

BMW AT-200 ECU Programmer V1.7.3 Update

BMW AT-200 ECU Programmer V1.7.3 Update:   1.ADD TC1796 Engine Type: Audi、BMW、Citroen、Dodge、Freightliner、Honda、Hyundai、Jaguar、Jeep、Kia、Lancia、Land Rover、Mercedes、Mitsubishi Fuso、Opel、Peugeot、Saab、Seat、Skoda、Vauxhall、Volkswagen(VW)、Volvo Penta、Volvo   2. ADD TC1724 Engine…

The professional ECU programmer-BMW AT200 has been updated to V1.7.0. With new update, it can support more ECUs and make the operation more convenient. This article will share the latest software free download link, update details and quick guide to use it. 图1 Part 1: AT200 BMW V1.7.0 Update (March 20th, 2020) Free download link: https://mega.nz/#!S9sTAQ7C!lsmw-ExXwftL8bR2ZdKSuLVXyHLY0O0rTPTCSJNxwRM Update info: 1.Software interface optimization and upgrading: -Wiring diagram display -Font size -Menu display (classified display, consolidated display) -Added search function -Added help button 2.Added the engine types: -Added TC1766: Can-Am, KTM, Piaggio; -Added TC1767: Lincoln; -Added TC1797: Artec, Fendt, New Holland; -Repair some Bosch engine write abnormal problems -Optimized car diagram: BOSCH EDC17C10, BOSCH EDC17C41, BOSCH EDC17CP45, BOSCH EDC17CP48 ver2, BOSCH EDC17CP48, BOSCH MED17.9.3 - Added Traditional Chinese language Part 2: Quick Guide to use BMW AT-200 Software 1.After install AT200 V1.7.0, remember to check the driver. Then connect AT200 BMW ECU programmer to computer and vehicle 2.AT200 software home page Enter AT200 software, you can see the page with car brand, model, Engine-gearbox and ECU SN (Product serial number), current firmware/software version and device activation time remaining are at the bottom of the page. Note: Remaining time can be activated automatically after expiration or contact the manufacture 图2 3.Setting In the setting option, you can select any language based on your need 图3 Whether to tick the wiring diagram depends on your operating habits Font size can be adjusted between 8 and 20. 图4 There are two display modes: Category and Merge. The purpose of this option is to adjust the software architecture. 图5 This is Merge mode which is different from category as shown above. 图6 4.License In the license options, you can see all the authorization of software functions, incl. all the functions that need to be activated, mainly see “Function name” Note: If “Function name” indicated “YES”, it is already opened, and “No” indicates that it is not opened. You can click “Update Authorization” to see if the function is enabled. 图7 5.Help This new function contains the instruction manual and operation video. Note: If you are not familiar with the product, you can click the corresponding tutorial title to watch. 图8 6.Search Select car brand and enter the DME module you need in the searching box 图9-10 7.Platform 1).Category mode: Select brand, model, Engine-gearbox and ECU, then click “Platform” 图11 Follow the prompt to double-click the wiring diagram to zoom in 图12 There are 9 operation options on the right: Wiring diagram, Identification, Modify VIN, Read ISN, Write ISN, Read DFlash, Write DFlash, Read PFlash and Write PFlash 图13 2). Merge mode: Select car brand and ECU, then click “Platform” 图14 It’s same as Category mode, also can double click the wiring diagram to see the larger picture But in the mode, there are only 6 operation options incl. Wiring diagram, Identification, Read ISN, Write ISN, Backup data and Restore Data. 图15 Then you can operate according to your need. For your information, here is the related BMW AT200 V1.7.0 software basic operation video. https://www.youtube.com/watch?v=zL-DESRKS2M (设置可直接观看的视频) Learn more details about BMW AT200 AT-200 V1.7.0 ECU programmer & ISN OBD reader: http://www.cgdishop.com/wholesale/bmw-at-200-programmer.html
 Continue Reading...
Posted in AT200 BMW

Quick Guide to Use BMW AT200 V1.7.0

The professional ECU programmer-BMW AT200 has been updated to V1.7.0. With new update, it can support more ECUs and make…