One customer used CG100 Prog III to repair mileage for 2010 Volvo S80L, worked like a charm!
Here are the operation steps.
Step 1: Check the car type and car year, and obtain the car information from the VIN
Step 2: Record the original mileage on the dashboard. It’s 160886 KM.
Step 3: Remove the dashboard and check chip number.
Kilometers are stored in the chip: 9S12H256
Step 4: Connect CG100 software
Select Programmer>> 9S12H256
Step 5: Follow the Pin diagram in the software to connect CG100 and dashboard
Step 6: Read the original data, and check if the km is the same as the dashboard km
Step 7: Write the target mileage of 100910 KM manually or send data to tech support to modify.
Step 8: The new mileage is written successfully. Install the dashboard back to the car, and all are ok.
Thanks to the customer for his sharing!