Can CG PRO 9S12 correct mileage for BMW 160D?
Yes. It has been tested by our professional technician and proved it’s OK.
Here is the related test report.
Car: BMW 160 DQ dashboard
Record the current mileage of original car- 101024km
Turn off the ignition of the car switch
Remove the instrument from the car
Open the dashboard shell
Mileage is stored in a chip of 160D
Unsolder the chip and clean–> Put it into the 35160WT adapter
-> Connect to CG PRO 9S12 programmer and PC
Enter CG PRO software
Select type: Dashboard-> Brand: BMW -> Model: 160DQ (mode1)
Then click “Read” to read data
Read out the original mileage is 101024km
Save the EEPROM data
When save successfully, click the red button next to the mileage in the lower left corner
Input a new mileage you want and click “OK”
Write data successfully, the new mileage shows in the bottom left corner
Click “Read” to read data again
Read new data success and save
Save the file successfully
CG PRO 9S12 Correct Mileage for BMW 160D video:
Please kindly notice:
CG Pro 9S12 programmer newly released new design which will work more stable.
If your CG Pro 9S12 was bought before Apr 10th, 2019, it will be old design. From Apr 10th, CG Pro 9S12 is with new design.
Please choose the corresponding CG Pro 35160WT adapter.
- If your CG Pro 9S12 is with new design, please choose New Design
- If your CG Pro 9S12 is with old design, please choose Old Design