Solution: When CGpro can not detect the key chip, and shows error “No found key”
1、First remove the cover with coil of the cgpro, and place it as shown in the picture below. And
then try to write key.
2、If still not work, then please try to put the chip into these places marked in read
3、Avoid touching the coil position by hand and keep the equipment stable during operation
4、Put back the cover after finishing the operation.
Please Note: Do not break the coil
If the above steps cannot solve the problem, the customer can try to buy the L4 inductor on the CGPRO mother board, the position in the lower right of the USB interface.
This is old one:
This is new one:
Inductance model: SHC0603-470m, patch 0603