Here are some CG FC200 ECU Programmer Questions and Answers. Hope you find it helps if you are interested in CG FC200.

 

Q1. Is the data read out encrypted?

A1. BMW: MSD80, MSD81, MSD85, MSD87, MSV80, MSV90 encrypted;

Mercedes-Benz: SIM271DE, SIM271KE encrypted;

The other engine and gearbox computers are not encrypted.

 

Q2. Can the fault code be shielded?

A2.Yes, so far CG manufacturer does not provide data modification, maybe it will update in the future if the customer needs.

 

Q3. Can a power upgrade be done?

A3.Yes, so far CG manufacturer does not provide data modification, maybe it will update in the future if the customer needs.

 

Q4. Is the data automatically calibrated?

A4. The ECU data of the Bosch series supports automatic calibration.

 

Q5. Can CG FC200 clone BMW MSV90 engine computer?

A5: Yes, it can.

 

Q6. In what mode does CG FC200 operate?

A6.No need to open the ECU box: via OBD, on bench mode.

Need to open the ECU box: BOOT mode.

 

Q7. Can CG FC200 renew the gearbox computer?

A7.No, it can’t. So far it can only read & write the data, and clone the data. Maybe it will update in the future if the customer need.

 

Q8. Can CG FC200 inactivate immobilizer.

A8.It can inactivate immobilizer for Bosch MED/EDC17 series engine computer.

If it is other models, it may be added in the future if the customer needs.

 

Q9. What is removing TPROT?

A9. Remove the adjustment protection.

 

Q10. Is there an annual subscription for CG FC200?

A10.After CG FC200 is activated, it is free to update for the first year.

 

Q11. If the annual subscription is not paid, can the CG FC200 continue to be used?

A11. Yes, it can be used, but the functions that need to use the server are not available, such as data calibration.

 

Q12. What ECU systems can CG FC200 access to?

A12. It can access to engine and gearbox, currently mainly engine.

 

Q13. What ECU models can CG FC200 support?

A13. It supports the ECUs produced by Bosch, Siemens, Continental, Delphi, Marelli, Continental, TEMIC and other manufacturers, but more ECU by Bosch.

 

Q14. Can CG FC200 read the domestic ME17 computer?

A14. Yes, it can, but it depends on the model, such as ME17.8.8.

 

Q15. Does it need to be connected to the Internet during operation?

A15. Yes, it needs.

 

Good to know:

CG FC200 ECU Programmer Full Version is out of stock these days, recommend you CG AT200 V1.8.5 ECU Programmer & ISN OBD Reader instead. Read article: CG FC200 VS CG AT200.

Alright, any questions and suggestions, please contact at https://www.cgdishop.com/