How to repair Toyota 89170 02A80 Airbag ECU with CGDI CG100X Programmer?
Use the CG100X EEPROM Adapter and EEPROM Clip to work with CG100X, and follow the wiring diagram and precautions in the software to operate easily.
Detailed guide:
Connect CG100X programmer and computer via USB cable, and supply power to the device as well
Run CG100X software
Enter Airbag function
Input 89170-02a in the search box to quickly find the ECU model
It’s 89170 02A80 93C56.
Click “Next”
Check the precautions and wiring diagram
- Check the number of airbag shells carefully.
- Pay attention to the PIN 1 position of the airbag module before removing the chip.
- After removing the chip, clean it to ensure contraction is successful.
- Pay attention to the position of PIN 1 when operating the EEPROM Adapter. If you cannot read it, use the welding plate
- When repairing data, if there are two options: clear code and overwrite, choose clear code first. If not, repair by default.
- The repair is successful. There is no need to click “Write”, weld back to the airbag module, and install it on the car
Plug EEPROM Adapter to CGDI CG100X
Use CG100X EEPROM Clip to connect PIN 1 of airbag ECU and EEPROM Adapter
After connection, click “Start operation”
It will read EEPROM data.
Save the data after reading.
Confirm to repair the airbag data
Repair data successfully
Alright! It’s so easy and fast to use CG100X New Generation Programmer to repair Toyota 89170 02A80 Airbag ECU.